The piston rod can be pulled and pushed by air, and can be operated accurately by double guide rod. When the cylinder is squeezed, the assembly slot is reserved in the periphery; Make the sensor in the installation of fixed and position adjustment, are extremely simple; Exquisitely fixed design, RCI sensor fixed on the body is not prominent, nor does it occupy space; All series are magnetically attached;

The e piston rod is pushed by air to produce pull and push functions, and through the double guide rod action can be accurate operation; 2~6 sensors can be installed according to the actual demand; All series are magnetically attached;

In order to pursue the most practical effect, the company designed this space saving, and easy to install products; Can be mounted by two side piping; There are three types of mounting body; Equipped with four grooves, installed embedded sensor; All series are magnetically attached.

Guide rod and connecting block are intersticed structure, which can exert high strength and toughness (special) point under strong lateral load. The connection block of the guide rod end can be divided into two kinds: column connection block (block type) and platform connection block (lift type). According to the use of precision requirements, in the guide rod bearing design (there are) "sliding bearing", "linear ball bearing" two; On the outside of the cylinder block and the connecting block, pre-configured with a variety of designs, easy to install and use; All series are magnetically attached.

By the integral design of the double guide rod and the actuating pressure cylinder, the excellent characteristics of no bias can be improved when the long stroke is actuated. According to the use of precision requirements, in the guide rod bearing part is designed with "sliding bearing", "linear ball bearing". For high speed actuation, it is recommended to use "linear ball bearing" type to improve the actuation accuracy. Considering the ease of installing and pushing out parts for customers, the company for the front end of the piston rod, to the cylindrical connecting block for the launch of the type of standard parts; Only the piston rod end of the cylindrical connecting block, replaced with a platform connecting block, can be used in long actuating stroke lifting type installation; All series are magnetically attached.